TAPOX 2 – K Epoxy coatingFertan DE2019-03-11T14:56:54+00:00
TAPOX 2 – K Epoxy coating
Temperature resistant up to 80°C
Suitable for all tank types (e.g. motorbike, car, boat, ship, fuel oil tank, industrial tank)
Product Data Sheet
Specially engineered for application on variety of tanks like, fuel tanks made of aluminium or steel for vehicles, ships or water tanks.
Also widely used in the industry for coating concrete floor that are subjected to lot of wear.
The TAPOX 2-K Epoxy coating comes in a container of the size large enough to mix the TX-10 hardner. The TX-10 is of the same quantity required to harden the TAPOX.
Tank Volume: The TAPOX 2-K container (285 ml TAPOX / 160 ml TX-10)is sufficient for treating the tank volumes between 22-40 Liters.
Before use, stir the product TAPOX very well, add hardener and mix to a completely thin coating. Please note that TAPOX is a resin and not a paint and must, therefore, be stirred longer to obtain the completely thin mixture! Clean the tank very thoroughly before the internal coating, derust it and protect it against new corrosion with FERTAN. Only apply the TAPOX coating in a completely dry tank. Follow the processing instructions carefully. Working time of the mixed product, for intermediate storage at 0° – max 4° C, maximum 4 hours. If you do not have the exact processing instructions, which must absolutely be observed, please download them free of charge.
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.